Raider Power Tools RD-GCS15 User Manual page 19

Parameter
Sprocket
Recommended guide-bar length
Cutting length with guide-bar 350 mm (14")
Cutting length with guide-bar 400 mm (16")
Cutting length with guide-bar 450 mm (18")
Equivalent vibration level (ahveq) ) front / rear handle
Sound pressure level Lp
Sound power level Lw
1. General guidelines for safe operation.
1.1. Safe operation of gasoline chain saws.
Warning! Persons unfamiliar with instruction manual are not allowed to use chain
saw.
Use the chain saw for cutting wood only.
Other use of the chain saw is the sole responsibility of the user who should bear in
mind that it may be dangerous.
The manufacturer is not responsible for losses and damages resulting from
unintended use of the chain saw.
Workplace
1.2. Work area safety.
Keep your workplace tidy and ensure it is well lit.
Untidiness and insufficient illumination contribute to accidents especially when
chain saws are in use.
Keep children and bystanders away from the workplace.
Distraction may cause loss of control over the tool.
1.3. Personal safety.
Use safety equipment, such as work suit, protective glasses, protective shoes,
protective helmet, earmuffs, protection and leather gloves. Using safety equipment in
appropriate conditions reduces risk of body injury.
Do not overestimate your abilities. Stand firmly and keep your balance at all times.
It enables better control over the saw in unpredicted situations.
Do not wear loose clothing or jewellery. Keep your hair, clothes and gloves away
from moving parts.
Loose clothing, jewellery or long hair may be caught by moving parts.
1.4. Transportation and storing.
When carrying the chain saw switch off the engine, put on the chain cover and
switch on the chain brake. Carrying unsecured and operating chain saw may cause
body injury.
Carrying the chain saw is possible only when holding its front handle.
Other parts may not ensure appropriate grip and even cause injury.
Inspect your chain saw. Check alignment and fixing of moving parts, check against
part cracks and all other factors that may affect operation of the saw. Repair the saw
before use if it is found damaged. Many accidents are caused by improper maintenance
of tool.
Cutting chain should be clean and sharp. Proper maintenance of sharp cutting edges
A
A
Units of
Value
measurement
7 teeth x 0.325"
-
(8,25mm)
350 - 450 mm,
min - max
(14" - 18")
mm 340
mm 390
mm 440
m/s 11.89/11.55
2
dB(A) 99.2
dB(A) 110.0
19