Software Functions - Rice Lake LaserLight3 Quick Reference Manual

LaserLight3 Remote Display Operator Quick Reference Guide
Menu and Text Editable Parameter
Time
10/08/22
Number Element
1 Red Font
2 White Font with
Blinking Cyan
Underline

Software Functions

This section provides procedures for basic LaserLight3 software functions.
NOTE: Additional functions available if Setup mode is enabled. For more information, see LaserLight3 Remote Display
Technical Manual (PN 214748).
Edit Time Value
Select Time in the top-level menu to edit the time.
1. Navigate to Setup ► ... ► Time.
2. Press to set the time.
3. To edit the time value:
• Press and
• Press and
4. Press . OK displays.
5. Press then
NOTE: Time is backed up by the internal battery and is not lost if the main power is interrupted. For more information, see
LaserLight3 Remote Display Technical Manual (PN 214748).
4 Visit our website
Date
1
2
Figure 5. Text Editable Menu Example
Red font appears in two scenarios:
• In center column to indicate selected menus and parameters
• On left or right sides to indicate available menus, options or parameters
Indicates a text configured parameter. Move character selection (cyan underline) with
Press and to change characters
Hold to delete a character or hold
Press to confirm character configuration and return to the previous menu
Table 5. Text Editable Menu Element Descriptions
Setup MAC ID
Figure 6. Time Parameter Menu Path
to select characters
to edit the underlined character
to exit the menu.
www.RiceLake.com
Version
MM/DD/YY
Description
to insert a 0 character
Test Time
and .