Normal Mode - Mitsubishi Diamond Pro 87TXM User Manual

4.1

Normal Mode

Press any select button and control indicators will be superimposed on the display
screen.
Refer to Figure 6 for the location of the monitor function (
trols. Press the select buttons to choose one of the following controls.
When the indicator of a function symbol comes on the screen and changes to blue, that
control is active and can be adjusted by the adjust buttons. The monitor automatically
memorizes all adjustments.
If you don't touch the control switches for approx. ten seconds, the OSD screen will
disappear.
RESET OSD OFF
FUNCTION AND OSD
(1) CONTRAST
NORMAL NORMAL
CONTRAST
BRIGHT
(2) BRIGHT
NORMAL NORMAL
CONTRAST
BRIGHT
ADJUST
SELECT
Press the Minus
Adjust Button:
50%
To decrease the
contrast.
Press plus and minus buttons together, to
restore to factory preset level.
50%
To decrease the
brightness.
Press plus and minus buttons together, to
restore to factory preset level.
21
) con-
Button: select up
Button: select down
DEGAUSS
Button: select right
Button: select left
Press the Plus
Adjust Button
To increase the
contrast.
To increase the
brightness.