Mitsubishi Diamond Pro 87TXM User Manual page 30

NOTE
When the monitor has no sync signal or incorrect connection and signal frequency is out
of range, the following CAUTION comes on the screen. Check input signal, signal cable
connection and signal frequency.
1. POWER SAVE IS OFF
When POWER SAVE is OFF and there is no sync signal, the following screen
is displayed.
2. POWER SAVE IS ON
(1) When POWER SAVE is ON and
there is no sync signal, the following
screen is displayed for 5 seconds.
ATTENTION
NO SIGNAL
H OFF V OFF
3. POWER SAVE IS ON OR OFF
When signal frequency is out of range, the following screen is displayed.
ATTENTION ATTENTION
POWER-SAVE POWER-SAVE
NO SIGNAL NO SIGNAL
H H OFF V OFF V OFF OFF
OFF OFF
PLEASE PLEASE
CHECK INPUT CHECK INPUT
SIGNAL OR SIGNAL OR
CONNECTION CONNECTION
(2) Before 2 seconds POWER SAVE
function works, the following screen
is displayed.
POWER-SAVE POWER-SAVE
OFF OFF ON ON
ATTENTION
SIGNAL FREQUENCY IS
OUT OF RANGE
PLEASE CHANGE SIGNAL
TIMING TIMING
29
ON ON
POWER-SAVE
POWER-SAVE