Table of Contents
Advertisement
Using the wired remote control mode
Connect the supplied remote cable to the remote control's
jack
and the "REMOTE
CONTROL"
terminal
on the
monitor.
When the cable is connected,
the mode automatically
switches to wired remote control. When the wired remote
control mode is used, the remote control can be operated
even if no batteries are loaded.
Operating Range
* Use the remote control within a distance of about 7 m/
23fl. from the front of the monitor's remote control sensor
mad at horizontal and vertical augles of up to approximately
30 ° .
* The remote control operation
may not function if the
monitor's
remote control sensor is exposed
to direct
sonlight or strong artificial light, or if there is au obstacle
between the sensor aud the remote control.
Handling the remote control
• Do not drop or mishandle the remote control.
• Do not get the remote control wet. If the remote control
gets wet, wipe it dry immediately.
• Avoid heat and humidity.
• Remove the batteries when not using the remote control
for a long period.
• Do not use new and old batteries
together,
or use
different types together.
• Do not take apart the batteries, heat them, or throw them
into a fire.
• When using the remote control in the wireless condition,
be sure to unplug the remote cable from the REMOTE
CONTROL
terminal on the monitor.
Advertisement
Table of Contents
