Factory Mode - Mitsubishi E55LCD Service Manual

3. Factory mode

Mention the contents of the factory menu letter.
Page 1:
1. A "Menu" key is pressed and the "BIAS" menu is displayed.
2. Press "Select" key to adjust the cursor to R,G or B.
3. Press (▲) or (▼) key can adjust each value is changed.
Page 2:
1. A "Menu" key is pressed and the "GAIN" menu is displayed.
2. Press "Select" key to adjust the cursor to R,G or B.
3. Press (▲) or (▼) key can adjust each value is changed.
Page 3:
1. A "Menu" key is pressed and the "SERVICE INFORMATION" menu is displayed.
2. The page can check "TOTAL TIME", "ON TIME" and firmware version.
Page 4:
1. A "Menu" key is pressed and the "ON TIME RESET" menu is displayed.
2. Reset by (▲) or (▼) key.
5-3