Function Controls - Mitsubishi Diamond Pro 87TXM User Manual

4
4

FUNCTION CONTROLS

The following screen adjustments and monitor settings are available at the front control
panel. For details of adjustment method, see sub-clauses 4.1 and 4.2.
NORMAL-MODE
(1) CONTRAST
Adjusts to the desired contrast level.
(2) BRIGHTNESS
Adjusts to the black level of the screen.
(3) H-SIZE (Horizontal Size)
Controls the horizontal size of the image on the screen.
(4) H-PHASE (Horizontal Position)
Controls the horizontal position of the image on the screen.
(5) V-SIZE (Vertical Size)
Controls the vertical size of the image on the screen.
(6) V-POSITION (Vertical Position)
Controls the vertical position of the image on the screen.
(7) PCC-AMP (Pincushion or Bow Amplitude)
Straightens the left and right sides of the screen image.
(8) PCC-PHASE
Adjusts the parallelism of the left and right sides of the screen image.
(9) PIN-BALANCE
Adjusts the curvature of the left and right sides of the screen image.
(10) KEY-BALANCE
Adjusts the vertical slant or tilt of the screen image.
(11) ROTATION
Adjusts the rotation or twist of the picture.
(12) H-STATIC (Horizontal Static Convergence)
Adjusts the horizontal alignment of the red, green and blue beams.
(13) V-STATIC (Vertical Static Convergence)
Adjust the vertical alignment of the red, green and blue beams.
(14) COLOR 1-RED, COLOR 2-RED, COLOR 3-RED,
Provides the red-color balances for the display.
(15) COLOR 1-GREEN, COLOR 2-GREEN, COLOR 3-GREEN,
Provides the green-color balances for the display.
(16) COLOR 1-BLUE, COLOR 2-BLUE, COLOR 3-BLUE,
Provides the blue-color balances for the display.
(17) POWER-SAVE (ON/OFF)
When adjusting ON, reduces the power consumption of the monitor when not in use.
(18) MOIRE-CLEAR (ON/OFF)
When adjusting ON, the moire level on the screen can be decreased by the MOIRE-
CLEAR LEVEL.
(19) MOIRE-CLEAR LEVEL
When MOIRE-CLEAR is on, decreases the moire level on the screen.
19