Mitsubishi Diamond Pro 87TXM User Manual page 29

FUNCTION AND OSD
(22) BOTTOM-PCC(Top of Corner Pincushion or Bow Amplitude)
ENHANCED
CENTER-PCC
TOP-PCC TOP-PCC
BOTTOM-PCC BOTTOM-PCC
(23) CLAMP PULSE POSITION
CLAMP PULSE CLAMP PULSE
POSITION POSITION
PURITY PURITY
FRONT FRONT
VIDEO LEVEL VIDEO LEVEL
(24) PURITY
CLAMP PULSE
POSITION
PURITY
VIDEO LEVEL
(25) VIDEO LEVEL
CLAMP PULSE
POSITION
1.0V
PURITY
VIDEO LEVEL
Press the Minus Adjust
Button:
To expand the width of
the screen image near
50%
the corners of bottom.
To clamp the video
signal at the front of
the H-Sync pulse.
BACK BACK
Input Full White signal to the monitor.
Press the plus and minus adjust buttons to get
pure white at the corner of picture.
Press plus and minus buttons together, to
50%
restore to factory preset level.
To select 1.0V of video
input.
0.7V
28
Press the Plus Adjust
Button:
To narrow the width of
the screen image near
the corners of bottom.
To clamp the video
signal at the back of the
H-Sync pulse.
To select 0.7V of
video input.