Macintosh Adapter Ad-A205 - Mitsubishi Diamond Pro 87TXM User Manual

7.4 Macintosh Adapter AD-A205 settings
The AD-A205 Macintosh Adapter allows you to take advantage of the built-in video
capabilities of your Macintosh computer with the monitor.
With it, you may select any available video mode via the DIP Switches.
Using the following chart, find the computer/resolution combination you wish to config-
ure. There are alternate settings available for most computer / resolution combinations,
but we recommend you to set the factory preset timing. (see 1.2 Internal Preset Memory
Capability)
The chart shows all available modes for Macintosh systems plus all possible combina-
tions with monitor. Please be aware that not all Macintosh modes are capable of driving
all Macintosh video modes.
DIP Switches
Display Monitor
In case of computer corresponding to Multimode, you can select the resolution on your
computer by setting the following switch.
Please refer to instruction book of your computer about resolution setting.
21"Multimode
1,2,6 = Set DIP switches 1,2 and 6 "ON" (Supports 640X480@67Hz; 832X624@75Hz;
1024X768@75Hz;1152X870@75Hz) or (Supports 640X480@67Hz;
832X624@75Hz; 1024X768@75Hz; 1152X870@75Hz; 1280X1024@75Hz ) or
(Supports 640X480@67Hz; 832X624@75Hz;1024X768@75Hz;
1152X870@75Hz; 1280X960@75Hz; 1280X1024@75Hz)
17"Multimode
1,2,5 = Set DIP switches 1,2 and 5 "ON" (Supports 640X480@67Hz; 832X624@75Hz;
1024X768@75Hz)
13"Multimode
1,2,5,6 =Set DIP switches 1,2,5 and 6 "ON" (Supports 640X480@67Hz;
832X624@75Hz)
Macintosh
35