Page 1
86(5 6 0$18$/ 2QO\ WKH SRLQW LV PHQWLRQHG % 9HUVLRQ AUTO-SCANNING WITH DIGITAL CONTROL COLOR DISPLAY MONITOR JC-17W41 Model USER’S GUIDE For future reference, record the serial number of your display monitor in the space below: Internet Home Page: http://www.necmitsubishi.com/ SERIAL No.
Page 2
(2) this device must accept any interference received, in- cluding interference that may cause undesired opera- tion. For questions regarding this declaration, contact: NEC-Mitsubishi Electronics Display of America, Inc. 1250 North Arlington Heights Road, Itasca, Illinois 60143-1248 or, call...
Page 3
Below you will find a brief summary of the environmental requirements met by this product. The complete environmental criteria document may be ordered from: TCO Development SE-114 94 Stockholm, Sweden Fax: +46 8 782 92 07 Email (Internet): development@tco.se Current information regarding TCO’99 approved and labelled products may also be obtained via the Internet, using the address: Congratulations!
INTRODUCTION • The monitor complies with Video Electronics Standards Congratulations on your purchase of the high resolution Association (VESA ) DDC 1/2B(EDID) specification. color monitor. We designed this monitor to provide you with years of reliable trouble-free operation. If your computer is Plug & Play compliant setup will be done automatically.
1.9 Quick Operation Chart Unpacking To summarize the steps in connecting your computer After you unpack the box you should have all of the items with the color monitor and setting the necessary controls indicated in Figure 1. Save the box and packing materials and switches, refer to the chart below.
PART NAME 2.1 Control Names See Figures 3 and 4 for the location of the user controls, indicator and connectors. Each part is identified by number and is described individually. REAR FRONT Figure 4 OSD OFF Figure 3 2.2 Function 1.
3 row D-sub(VGA) connector compatible with your is plugged into a properly grounded three-prong AC outlet. Mitsubishi monitor. The Macintosh Adapter is not needed The monitor’s auto-sensing power supply can automati- on G3 (ice and blue) and later version of the Macintosh. If cally detect 100-120V AC or 220-240V AC and 50 or 60Hz.
(On Screen Display) FUNCTIONS How to adjust the screen The monitor has an OSD(On Screen Display) function. The following procedure shows how to adjust the screen using the OSD function. Group Icon Main Menu Sub Menu OSD OFF (1) Turn on the monitor by pressing (2) Display the OSD screen by pressing (3) Select the group icon on Main Menu by pressing (4) Display the Sub Menu by pressing...
Adjustment Items x : Available Press the Minus Button Press the Plus Button Group Item Item Icon Icon To decrease the contrast. To increase the contrast. CONTRAST X X X To increase the brightness. To decrease the brightness. BRIGHT X X X (SCREEN) To select preferable display color mode.
Page 12
x : Available Press the Minus Button Press the Plus Button Group Item Item Icon Icon To decrease the level of the moire-clear wave. MOIRE CANCEL LEVEL To eliminate an excessive green or white-back ground that may occur when external sync signals are applied to the monitor. (PURITY) To clamp the video signal at the To clamp the video signal at the...
Before calling your Authorized Product Support, please check that the items below are properly connected or set. TROUBLESHOOTING In case of using a non-standard signal, please check the pin assignments and the signal timing of your computer with the specification outlined in Section 6. SPECIFICA- TIONS.
Page 14
ITEMS TO CHECK LOCATION PROBLEM • The 2 very faint thin lines across the screen are normal. Two fine horizontal They are caused by the aperture grille stabilization lines are visible on filaments(Damper Wires) which are required for all the screen. aperture grille CRTs’.
EN55022 Class-B EN61000-3-2, EN61000-3-3, EN55024 REGULATIONS X-Ray DHHS, HWC, Röv vom 8.1, 1987 Other CE-Marking, pr EN50279(MPR-III) ISO9241-3, ISO9241-7, ISO9241-8 (TÜV-GS) TCO '99 International E Program NERGY This monitor is registered / certified with Model No. JC-17W41. - 1-12 - ...
APPENDIX Optional Macintosh Adapter AD-A205 settings The AD-A205 Macintosh Adapter(option) allows you to Set the dip switches according to the following chart. take an advantage of the built in video capabilities of By using the following chart, you can choose a main your Macintosh computer with the monitor.
Page 17
“AD-A205 Mac Adapter Setting Chart” shows all available modes for Macintosh systems and all possible combinations with the monitor. We recommend that you use the monitor with a preset timing. (See Section 1.2 Internal Preset Memory Capability) Please refer to the instruction book of your computer about the resolution setting. Resolution may not be changed on some computers.