Connecting To An Apple Macintosh Centris, Quadra, And; Apple Macintosh Ii Family - Mitsubishi Diamond Pro 87TXM User Manual

2.2.2 Connecting to An Apple Macintosh Centris, Quadra, and Apple Macintosh II
Family
Figure 4 shows the SC-B102 cable and AD-A205 Adapter to the video port in an Apple
Macintosh.
1. Power off, both the monitor and the computer.
2. Set the DIP switches of Macintosh Adapter according to the setting chart.
(See 7.4 Macintosh Adapter AD-A205 settings.)
3. Connect the 15-pin (DB-15P) end of the AD-A205 Adapter to the straight 15-pin
connector on the Macintosh video port on the CPU or on the video board.
4. Connect the sub-miniature 15-pin (DB9-15P) end of AD-A205 Adapter to the
SC-B102 cable (computer).
5. Connect the monitor end of the SC-B102 cable to the DB9-15P receptacle on the
back of the monitor.
6. Power on the Macintosh, then the monitor.
7. After using the system, power off the monitor, then the Macintosh.
Serial
Power Cord
Signal
HD/COMP
R G B VD
DB9-
15P
CABLE SC-B102
Figure 4.
13
Apple
Macintosh
Computer
Macintosh
DB-15P
Adapter
DB9-15P
AD-A205