Upgrading The Firmware Via Usb Flash Disk; Setting Inverter Parameters Via Solargo App; Monitoring Via Sems Portal - Goodwe MS Series User Manual

08 System Commissioning

8.3 Upgrading the Firmware Via USB Flash Disk

Step 1 Contact the after-sales service to obtain the upgrade package.
Step 2 Save the upgrade package in the USB flash drive.
Step 3 Insert the USB flash drive into the USB port, and upgrade the software version of the
inverter following the prompts.

8.4 Setting Inverter Parameters via SolarGo App

SolarGo app is a mobile application that communicates with the inverter via Bluetooth module,
WIFi module or GPRS module. Commonly used functions are as follows:
1. Check the operating data, software version, alarms, etc.
2. Set grid parameters, communication parameters, etc.
3. Equipment maintenance.
For more details, refer to the SolarGo APP User Manual. Scan the QR code or visit
en.goodwe.com/Ftp/EN/Downloads/User%20Manual/GW_SolarGo_User%20Manual-EN.pdf
get the user manual.

8.5 Monitoring via SEMS Portal

SEMS Portal is an monitoring platform used to manage organizations/users, add plants, and
monitor plant status.
For more details, refer to the SEMS Portal User Manual. Scan the QR code or visit
en.goodwe.com/Ftp/EN/Downloads/User%20Manual/GW_SEMS%20Portal-User%20Manual-EN.
pdf to get the user manual.
SolarGo App
SEMS Portal
User Manual V1.1-2022-11-15
SolarGo App User
Manual
SEMS Portal User
Manual
30
https://
to
https://