Inverter Parameter Introduction - Goodwe MS Series User Manual

User Manual V1.1-2022-11-15

8.2.1 Inverter Parameter Introduction

Parameters Description
Home page. Indicates the real-time power of the inverter. Long press for 2s
Normal
to check the current safety code.
E-Today Check the generated power of the system for that day.
E-Total Check the total generated power of the system.
Vpv Check the DC input voltage of the inverter.
Ipv Check the DC input current of the inverter.
Vac Check the voltage of the utility grid.
Iac Check the AC output current of the inverter.
Fac Check the frequency of the utility grid.
Error History Check historical error message records of the inverter.
Indicates the specific inverter model. Long press for 2s to set the safety
Model code. Set the safety country in compliance with the local grid standards and
application scenario of the inverter.
Ver Check the software version.
Set Language Set language accordingly. Languages: English, Portuguese, Spanish.
Set time according to the actual time in the country/region where the
Set Time
inverter is located.
W/L Reset Power off and restart the WiFi module.
Restore the factory settings of the WiFi module. Reconfigure the WiFi
W/L Reload
module network parameters after restoring the factory settings,
PF Adjust Set the power factor of the inverter according to actual situation.
Shadow MPPT Enable the shadow scan function if the PV panels are shadowed.
Soft limit: Set the power feed into the utility grid according to local
requirements and standards.
Power Limit
Hard limit: The inverter and the utility grid will automatically disconnect
when the power feeds into the grid excesses the required limit.
Set the power feed back into the utility grid according to the actual
Set Power Limit
situation.
Set Modbus
Set the actual Modbus address.
Addr
08 System Commissioning
29