Table of Contents
Advertisement
8/48
Press module Type IH04E | Safety instructions
Bosch Rexroth AG, Edition 09.2022, RE 63129-MON
2 Safety instructions
2�1 About this chapter
The press module type IH04E was designed and manufactured according to
the generally accepted code of practice. However, there is still the danger of
personal injury and damage to property if you do not observe this chapter and the
safety instructions in this documentation.
▶ Read this documentation completely and thoroughly before working with
the press module type IH04E.
▶ Keep this documentation in a location where it is accessible to all users at
all times.
▶ Always include the required documentation when you pass the press
module type IH04E on to third parties.
▶ Additionally, please observe the safety instructions for the overall
machine/system.
The safety instructions in these instructions only refer to the scope of delivery.
Due to the interaction between the press module IH04E and the overall
machine/system, the installation of the press module IH04E into the machine
involves additional hazards. This applies in particular to the influence of
hydraulic and electric controls on hydraulic drives which generate mechanical
movements. It is therefore essential for the manufacturer of the overall
machinery/system to have undertaken an independent risk assessment.
Furthermore, the manufacturer must on this basis have prepared operating
instructions for the overall machine/system.
These assembly instructions do not serve as replacement of the operating
instructions of the overall machine/system.
2�2 Intended use
The product is a hydraulic control block. It is intended for use in industrial
machines only. You may use the product as follows:
• for the control of a lower piston die cushion in hydraulic or mechanical presses
according to EN ISO 16092
• in accordance with the application and environmental conditions according
to the data sheet 63129
• in accordance with the specified performance limits according to the
system-specific circuit diagram and according to data sheet 63129
• using in the original state (apart from system-specific settings) and/or
without damage
The press module type IH04E is technical equipment and not intended for
private use.
Advertisement
Table of Contents
