Table of Contents
Advertisement
14/48
Press module Type IH04E | Safety instructions
Bosch Rexroth AG, Edition 09.2022, RE 63129-MON
Contact with hydraulic fluid!
Health hazard/impairment of health, e.g. eye injuries, skin lesions,
poisoning due to inhalation and swallowing!
▶ Avoid contact with hydraulic fluids.
▶ When dealing with hydraulic fluids, you must implicitly observe the
safety instructions of the hydraulic fluid manufacturer.
▶ Use your personal protective equipment, e. g safety goggles.
▶ If however hydraulic ... fluid comes into contact with the eyes or enters
the bloodstream or is swallowed, consult a doctor immediately.
Slip hazard due to oily surfaces!
Risk of injury!
▶ Protect and mark the danger zone.
▶ Immediately remove leaked hydraulic fluid.
▶ Use an oil binding agent in order to bind the leaked hydraulic fluid.
▶ Remove and dispose of the contaminated oil binding agent,
see chapter 8 "Disposal".
▶ Wear the protective equipment, e.g. safety shoes, prescribed for your activity.
Improperly laid pipes, hoses and cables!
Risk of injury! Risk of stumbling!
▶ Lay pipes, hoses and cables so that no-one can trip over them.
▶ Fasten cables and lines in order to prevent them from getting loose due
to vibrations.
▶ Do not assemble hydraulic hoses close to heat sources.
Malfunction or unexpected system movements due to functional failures,
e�g� jamming of valve spools, leakage in poppet seats or clogging of nozzles,
due to contaminated hydraulic fluid!
Risk of injury!
▶ Comply with the cleanliness classes required in the relevant data sheet.
▶ If necessary, flush the hydraulic system for commissioning.
CAUTION
Advertisement
Table of Contents
