Measurement Channel List; Operating The Measuring Menu - Siemens 7MJ2000-1A 00 Series Operating Instructions Manual

6.3.2

Measurement channel list

The acoustic diagnostics unit has a total of eight measurement channels:
● 4 acoustic channels
● 4 universal inputs
All eight measurement channels are listed in the following measurement channel list. There
is a brief explanation of which functions are available in each channel.
Table 6- 1
Meas
urem
ent
chann
el
1
2
3
4
5
6
7
8
6.3.3

Operating the measuring menu

Procedure
The measured value of a measurement channel is displayed as follows:
1. Press the <MEAS> button to switch to the measuring menu.
2. Select the measurement channel with the
Note
Disconnected measurement channels
Measurement channels configured with "oFF" are not displayed. This is set in the
parameters P.1 to P.4 and P.26 to P.29. If all measurement channels are "oFF", "oFF/ALL"
appears in the digital display.
Note
Switching the device on
After you have switched on the device, the device automatically switches to the measuring
menu.
SITRANS DA400 for oscillating positive displacement pumps
Operating Instructions, 09/2008, A5E00841120-03
Measurement channel list
Meaning
Acoustic channel 1
Acoustic channel 2
Acoustic channel 3
Acoustic channel 4
Universal input 1
Universal input 2
Universal input 3
Universal input 4
measurement channel is shown in the digital display.
Digital display Terminal
figure assignment figure
1/So1 Sens 1
2/So2 Sens 2
3/So3 Sens 3
4/So4 Sens 4
5/In1
6/In2
7/In3
8/In4
and
6.3 Measuring menu
Available functions
Measuring mode, simulation
mode, test mode,
acknowledge alarm
In 1 Measuring mode
In 2
In 3
In 4
buttons. The measured value of the
Operation
39