Digital Display - Siemens 7MJ2000-1A 00 Series Operating Instructions Manual

6.2

Digital display

Introduction
The sections below give an overview of the elements that appear in the digital display.
Layout
Pressing the <MEAS> button in the measuring menu activates a test of the digital display,
see the following figure:
➀
②
③
Figure 6-2
Description
In the upper section ➀ of the digital display, alarm messages are indicated using symbols:
● Pre-alarm
● Main alarm
● Summation alarm
In the middle section ②, the digital display shows the following, depending on the selected
menu:
● Measured value or fault symbol, parameter value, timer value (trace)
● Channel number, parameter name, timer name (trace)
In the lower section ③, the digital display shows the following, depending on the selected
menu:
● PAR in parameter menu only
● Value for main alarm or limit value, parameter number, time unit in trace menu.
SITRANS DA400 for oscillating positive displacement pumps
Operating Instructions, 09/2008, A5E00841120-03
Upper section
Middle section
Lower section
Digital display
Operation
6.2 Digital display
37