6.4.5
Parameter lock
You can activate a parameter lock by special use of a universal input.
To do that, an electrical connection must be set up (e.g., wire jumper in the device, external
key switch) and an appropriate input parameter must be assigned.
input
In 1
In 2
In 3
In 4
If several inputs are parameterized with the function "noPA," the function will be activated
upon switching on ("ORing").
See also
Parameter list (Page 51)
SITRANS DA400 for oscillating positive displacement pumps
Operating Instructions, 09/2008, A5E00841120-03
Configuration
P.26/INP1 = noPA
P.27/INP2 = noPA
P.28/INP3 = noPA
P.29/INP4 = noPA
Operation
6.4 Parameter menu
Connecting terminals
57 = 58
67 = 68
77 = 78
87 = 88
55