GE ASTAT XL User Manual page 57

8.7.3 Reset Thermal Models
NOTE
This function is protected by the security access code.
The ASTAT XL's advanced thermal modelling software constantly monitors the motor's performance.
This allows the ASTAT XL to calculate the motor's temperature and ability to start successfully at any
time. If the ASTAT XL is configured for use on two motors, each motor's temperature is modelled
separately.
The thermal model for the active motor can be reset if required.
1. Open the Setup Tools.
2. Scroll to Reset Thermal Models and press ENTER.
3. Use to select Reset and press ENTER to confirm.
4. When the thermal model has been reset, the screen will display a
confirmation message then return to the previous screen.
CAUTION
Resetting the motor thermal model may compromise motor life and should only be done in
the case of emergency.
ASTAT XL User Manual
DET-812
Fout! Stijl niet gedefinieerd.
Reset Thermal Models
M1 X%
M2 X%
ENTER to Reset
Do Not Reset
Reset
57