Table of Contents
Advertisement
Description:
3E – Kickstart Level-2
Range:
Description:
3F – Kickstart Time-2
Range:
Description:
3G – Excess Start Time-2
Range:
Description:
3H – Stop Mode-2
Options:
Description:
3I – Stop Time-2
Range:
Description:
3J – Adaptive Start Profile-2
Options:
Description:
3K – Adaptive Stop Profile-2
Options:
Description:
3L – Adaptive Control Gain-2
Range:
Description:
8.4.4
4 Protection Levels
4A – Current Imbalance
Range:
Description:
4B – Phase Sequence
Options:
Description:
44
ASTAT XL User Manual
Sets the total start time for an Adaptive Control start or the ramp time for
current ramp starting (from the initial current to the current limit).
100% - 700% FLC
Sets the level of the kickstart current.
0 - 2000 (milliseconds)
Sets the kickstart duration. A setting of 0 disables kickstart.
0:00 - 4:00 (minutes:seconds)
Set as required.
Coast To Stop (default)
TVR Soft Stop
Adaptive Control
Brake
Selects the stop mode.
0:00 - 4:00 (minutes:seconds)
Sets the stop time.
Early Acceleration
Constant Acceleration (default)
Late Acceleration
Selects which profile the ASTAT XL will use for an Adaptive Control soft start.
Early Deceleration
Constant Deceleration (default)
Late Deceleration
Selects which profile the ASTAT XL will use for an Adaptive Control soft stop.
1% - 200%
Adjusts the performance of Adaptive Control. This setting affects both
starting and stopping control.
10% - 50%
Sets the trip point for current imbalance protection.
Any Sequence (default)
Positive Only
Negative Only
Selects which phase sequences the soft starter will allow at a start. During
its pre-start checks, the starter examines the sequence of the phases at its
DET-812
Fout! Stijl niet gedefinieerd.
Default: 500%
Default:
0000 milliseconds
Default: 20 seconds
Default: 0 second
Default:
75%
Default:
30%
Advertisement
Table of Contents
