Table of Contents
Advertisement
Introduction
1.3.5
Power-On/Off (Remote)
The board has a single 20-pin connector for ATX power supplies. For ATX
power supplies that support the Remote On/Off feature, this should be
connected to the systems front panel for system Power On/Off button. The
systems power On/Off button should be a momentary button that is
normally open.
The board has been designed with "Soft Off" functions. You can turn Off
the system from one of two sources: The first is the front panel Power
On/Off the button, and the other is the "Soft Off" function (coming from the
M/B onboard circuit controller) that can be controlled by the operating
system such as Windows
1.3.6
M762A Series Overview
Function / Model
Chipset
LCD Function
VGA Function
SCSI Function
Ethernet Function
Two EIDE Interface
One Floppy Interface
Two Serial, One Parallel
Four USB port (Two for Optional)
32-bit/33MHz Slot
64-bit/66MHz Slot
AGP Slot
®
95/98/SE/ME or Windows
4
®
2000.
M762A
AMD-760™MPX (762+768)
/
/
/
3
2
1
Advertisement
Table of Contents
