Table of Contents
Advertisement
Wake-Up by PCI Card:
An input signal from PME on the PCI card awakens the system from a soft
off state.
The choice: Enabled, Disabled.
RI Resume/WOL:
An input signal on the serial Ring Indicator (RI) line (in other words, an
incoming call on the modem) awakens the system from a soft off state.
The choice: Enabled, Disabled.
MODEM Use IRQ:
This determines the IRQ in which the MODEM can use.
The choice: 3, 4, 5, 7, 9, 10, 11 and NA.
RTC Resume:
When "Enabled", your can set the date and time at which the RTC (real-
time clock) alarm awakens the system from Suspend mode.
The choice: Enabled, Disabled.
PM Events:
PM events are I/O events whose occurrence can prevent the system from
entering a power saving mode or can awaken the system from such a
mode. In effect, the system remains alert for anything, which occurs to a
device, which is configured as Enabled, even when the system is in a
power down mode.
IRQ3 (COM2)
IRQ4 (COM1)
IRQ5 (LPT2)
IRQ6 (Floppy Disk)
IRQ7 (LPT1)
IRQ8 (RTC Alarm)
IRQ9 (IRQ2 Redir)
IRQ10 (Reserved)
IRQ11 (Reserved)
IRQ12 (PS/2 Mouse)
IRQ13 (Coprocessor)
IRQ14 (Hard Disk)
IRQ15 (Reserved)
51
Award BIOS Setup
Advertisement
Table of Contents
