EPOX M762A Series Installation Manual page 49

Industrial board
Table of Contents

Advertisement

Award BIOS Setup
AGP Always Compensate:
When set, dynamic compensation is performed by AGP on an ongoing
basis at regular intervals.
The choice: Enabled, Disabled.
SDRAM ECC Setting:
When set 00=ECC disabled, no error detection or correction is performed,
01=EC_HiPerf mode enabled, Error checking and status reporting is
enabled.
Data detined for the PCI/AGP and memory (RMR) is not
corrected.
The choice: Enabled, Disabled.
Super Bypass Mode:
When set the AMD-762™ system controller internally bypasses certain
memory pipe stages for optimal performance. This bit may be set only if
both of the following are true.
The choice: Enabled, Disabled.
42

Advertisement

Table of Contents
loading

Table of Contents