Setting Up The Card Slot As The Memory Card Drive Of The Computer - Canon PIXMA iP6700D Series Quick Start Manual

WNote You can save only the selected photos when you have selected
photos using the search function. For the information about the
search function, see "Searching for Photos with the Shooting
Date" on page 23.
Setting up the Card Slot as the Memory Card Drive of
the Computer
The card slot of the printer can also be used as the memory card drive of the computer.
~Important
e
To use the card slot of the printer as the memory card drive of the computer,
the printer must be connected to the computer, and the Memory Card Utility
must have been installed for Windows Me/Windows 98/Windows 98 Second
Edition. If the utility is not installed, install it following the installation
procedure explained in the Easy Setup Instructions.
e
When Read/write mode is selected, you cannot print photo in the mempry card.
After you are finished with using the card slot as a memory card drive for your
computer, remove the memory card, then be sure to select Read-only mode
again.
1
Ensure that both the printer and the computer are turned on, and connected
by a
USB
cable.
2
Display the Read/write attribute screen.
(1) Ensure that no memory card is in card slot.
If a memory card is in the card slot, remove it.
(2) Press the Menu button.
(3) Use the
~ ~
buttons to select Maintenance/settings and then press the OK
button.
(4) Use the
~ ~
buttons to select Device settings and then press the OK button.
(5) Use the A
~
buttons to select Other settings and then press the OK button.
(6) Use the A
~
buttons to select Read/write attribute and then press the OK
button.
3
Specify the Read/write attribute.
(1) Use the A
~
buttons to select a mode.
- When selecting Read/write mode, the card slot is used as the memory card
drive of the computer. Photo data can be written into the memory card.
- When selecting Read-only mode, the card slot is used only for reading. Be sure
to select this mode when printing photos.
(2) Press the OK button.
WNote If you use the card slot of the printer as the memory card drive of the
computer, follow the instructions for removal of the memory card
from the computer before removing it.
e
Windows: Right-click the removable disk icon and click Eject.
If Eject is not displayed on the screen, ensure that the
indicator lamp is not flashing and remove the memory
card.
e
Macintosh: Be sure to drag the icon into the Trash.
47