Chery Service Manual for A520
II. DISASSEMBLING
INSTALLING
WINDSHIELD
1. Lay down the seat back and remove the
coat track;
2. Remove the lower moulding
Cut off the double face adhesive tape at both
ends of the moulding with a scraper as shown
in the figure;
Tip: Entangle the tip of the scraper with
adhesive tape before starts.
3. Remove the glass of the rear window
① Pull the piano wire through between the
body and the glass from inside of the
vehicle
② Tie both ends of the piano wire with
wood block or similar
Tip: Use adhesive tape on the outside to
prevent the external surface from being
scuffed.
PDF created with pdfFactory Pro trial version
AND
THE
REAR
7
www.pdffactory.com
Body Dimension and Accessories
Figure 165
Figure 166
Figure 167