Chery A21 2005 Service Manual page 429

CHERY A21 SERVICE MANUAL
5.2 Process of Replacement
5.2.1 Process of Removal
Dismantle the timing belt (See "removal
1)
of timing belt" for details).
2) Engage the gear to 5th, then press the
brake with toes, and remove the timing
belt pulley.
3) Dismantle the fastening bolt of oil pump
with 10# sleeve and take out the oil
pump. Torque:8+3NM
4) Pry out the oil seal.
5) Clean the seat ring of oil pump.
5.2.2 Installation
1) Spread oil on the gasket of oil pump.
2) Mount the oil pump in its seat ring.
Note: The bulge of oil pump should be put
downwards because the wrong position can
not make the bolt be screwed in.
3) Mount the oil seal.
4) Mount the other parts.
6. Replacement of crankshaft rear oil seal
6.1 Needed tools and auxiliary materials
A set of big sleeves, a right-angled
screwdriver, a small hoist and engine oil
6.2 Process of Removal
1) Suspend the engine assembly from
vehicle (See "suspending of engine
assembly" for details）.
2) Remove the clutch pressure plate.
3)
For removing the flywheel, lock the
with special tool and then screw off the
fastening bolt with sleeve wrench.
4) Pry the old oil seal with the right-angled
screwdriver.
Note: Do not damage the oil seal seat ring.
PDF created with pdfFactory Pro trial version
MECHANISM OF 2.0NALC ENGINE
flywheel
40
www.pdffactory.com
Flywheel Tool
Fastening