Chery A21 2005 Service Manual page 134

CHERY A520 SERVICE MANUAL
2. Dismount the bolts connecting the
control arm and stabilizer bar.
Mounting torque: 50±3Nm (The left and
right sides are the same.)
3. Dismount the bolts connecting the
control arm and vehicle body.
Bolt mounting torque: 180±15 Nm (The left
and right sides are the same).
4. Dismount the bolts connecting the
control arm and under-frame, and
remove the control arm.
Mounting torque: 180±15N.m(The left and
right sides are the same).
Prevent the control arm from dropping
when loosening the bolts.
Assembly sequence:
1. Assemble the control arm according to
the disassembly sequence.
2. After assembly, the bolts must be
fastened to reach up to specified
torque.
PDF created with pdfFactory Pro trial version
53
www.pdffactory.com
CHASSIS