Chery A21 2005 Service Manual page 67

Chery Service Manual for A520
10. Mixing the bonding agent;
Note: Make sure that the moulding be
installed within the application period of the
bonding agent, and the bonding agent should
be mixed within 5 minutes.
① Clean the glass board and the putty
knife completely with solvent
② Mix 500 grams host crystal with 75
grams hardener completely on a glass
board or similar with a scraper
11. Applying the bonding agent;
① Cut off the pot tip and fill the bonding
agent into the pot
② Place the pot into the sealant gun
③ Apply the bonding agent on the glass as
shown in the figure
12. Installing the glass;
Tip: Make sure that the water resistant piece
adhered to the panel of the body as shown in
the figure
PDF created with pdfFactory Pro trial version
Body Dimension and Accessories
10 mm (0.39 inch)
Bonding agent
5
www.pdffactory.com
Figure 159
Figure 160
Figure 161