Chery A21 2005 Service Manual page 18

7. Crankshaft phase alignment
Screw off the bulkhead of cylinder block,
screw the crankshaft tool into it, rotate the
crankshaft
completely clamps the crankshaft. At this
time, the crankshaft cannot rotate clockwise
and counterclockwise.
8. Mount and strain the timing belt
Mount the timing belt in the position shown
in the figure, use allen wrench to rotate the
tension pulley in order to strain the belt,
fasten the tension pulley bolt. And fasten the
fixed bolt of air intake and exhaust camshaft
pulleys and the camshafts.
Torque:120±5Nm.
9. Lift down the special timing calibration
tools, and then fasten the valve chamber
cover, timing belt cover, the right engine
mounting
dynamo belt.
PDF created with pdfFactory Pro trial version
until the crankshaft
bracket of engine,
tool
Crankshaft Tool
and
9
www.pdffactory.com