Chery A21 2005 Service Manual page 64

Chery Service Manual for A520
INSTALLING
SHIELD
1. Cut away the rough parts on the body
with a knife and clean the cut surface of
the bonding agent with a rag soaked with
washer fluid;
Tip: Even if the entire bonding agent has
been cleared, you should also clean the body
surface and do not touch the glass surface
after cleaning.
2. Remove the stopper with a knife;
3. Clear the bonding agent adhered to the
glass with a scraper and clean the glass
with washer fluid;
Note: Do not touch the glass after cleaning.
PDF created with pdfFactory Pro trial version
THE FRONT WIND
www.pdffactory.com
Body Dimension and Accessories
Figure 150
Stopper
Figure 151
Figure 152
2
Bonding Agent