Chery A21 2005 Service Manual page 20

5. Remove the (f) the harness plug of CBR
solenoid valve.
6. Dismantle (g) the earth cable bolt of
cylinder head, remove (h) the wire
harness plug of starter coil, (i) wire
harness plugs of four oil injectors, (j)
knock sensor plug, (k) wire harness plug
of throttle valve controller.
7. Remove (l.) CBR solenoid valve plugs,
and (m) oil temperature sensor plugs
8. Loosen (n) generator positive pole output,
pull out (o) exciting current harness plugs
as well as the plugs of relevant parts of
the A/C compressor, steering booster
pump, oxygen sensor, and A/C high-low
voltage switch.. Loosen the fixed bolt of
starter harness to confirm the plugs of all
parts are completely separated.
PDF created with pdfFactory Pro trial version
f
j
11
www.pdffactory.com
g h
k
l
m
n
o
i