Chery A21 2005 Service Manual page 30

10 Replacement of Sparking Plug
10.1 Needed tools
Carry-on wrenches
10.2 Process of removal
1) Pull out the connection end of high
voltage cable and sparking plug.
2) Use carry-on wrenches to screw off the
sparking plug.
Torque:
10.3 Installation steps
The installing steps are reverse to those for
removal.
11 Replacement of Camshaft Position
Sensor
11.1 Needed tools
Allen wrench
11.2 Process of removal
1) Put the ignition key at the position of
OFF, and shut off the sensor plug.
2) Use allen wrench to loosen the sensor
fixed bolt
11.3 Installation steps
The installing steps are reverse to those for
removal.
Installation precautions: In the case of
installation, you should apply a layer of oil
onto the O-type ring of sensor.
PDF created with pdfFactory Pro trial version
21
www.pdffactory.com