Chery A21 2005 Service Manual page 108

CHERY A520 SERVICE MANUAL
5) Dismount fluid reservoir
Remark: Push the fluid reservoir upwards in
order to remove it from the master cylinder
and remove the O-shape seal ring from the
groove of fluid reservoir. Check whether the
fluid reservoir is cracked or deformed, and
replace it if necessary. Use clean denatured
alcohol to clean the fluid reservoir or use the
compressed air containing no lubricant to
clean the fluid reservoir.
6) Use 13# sleeve and ratchet wrench to
dismount the fixing nut (each at both
left and right side) of brake master
cylinder, and take out the brake master
cylinder.
6.2 Assembly sequence:
Assembly
disassembly sequence.
SECTION
BRAKE
BOOSTER
Needed tools: ratchet wrench, ratchet rod,
13# sleeve, vice clamp, 10#, 12# open end
wrenches and clamp pliers.
7.1 Disassembly sequence:
1) Disassemble the brake master cylinder.
(The disassembly sequence is detailed
in the "disassembly of brake master
cylinder").
2) Use clamp pliers to dismount the clamp
nearby the hose connecting vacuum
booster and engine.
PDF created with pdfFactory Pro trial version
sequence is opposite
VII REPLACEMENT
PEDAL AND VACUUM
to
OF
16
www.pdffactory.com
CHASSIS