Chery A21 2005 Service Manual page 151

CHERY A520 SERVICE MANUAL
left and right sides are the same, and the fastening torque is 100～120
fasten the bolt at this time.
——
Use bolt 10 and nut 11 to fix the rear strut 9 and rear lower control arm17( fix them at
the position as the arrow illustrated). The left and right sides are the same, and the
fastening torque is 80 ± 5
——
Use adjusting bolt 16, gasket5 and nut 4 to connect the rear upper control arm and
vehicle body. The left and right sides are the same, and the fastening torque is 100～
N ⋅ . Do not fasten the bolt and nut at this time.
120
——
Use bolt 15, gasket 6 and nut 7 to connect the guide bar and vehicle body. The left and
right sides are the same, and the fastening torque is 100～120
bolt and nut at this time.
——
Use adjusting bolt 14, gasket 13 and nut 12 to connect the rear lower control arm and
vehicle body. The left and right sides are the same, and the fastening torque is 100～
N ⋅ . Do not fasten the bolt and nut at this time.
120
——
Fasten the above-mentioned bolts and nuts to specified torques in turn.
PDF created with pdfFactory Pro trial version
N ⋅ . Do not fasten the bolt and nut at this time.
m
m
m
70
www.pdffactory.com
CHASSIS
N ⋅ . Do not
m
N ⋅
m . Do not fasten the