Control
2.
Control
2.1
Features of the control
The control provides the following analog and digital functions:
• Hardware allocation of digital and analog inputs and outputs.
• HSP5 interface for the connection with an operator or via special cable (00F50C0-0010)
with a PC
• Hardware of the control circuit „safety separated" according to EN 61800-5-1 (base TN-
C/-S mains)
• Operation and diagnosis via operator
• Safety function STO (two channel torque off)
2.2
Overview
Control 2KF5xxx-xxxx from G housing
X2A Control terminal strip
X2B Terminal block safety function
X3A Encoder interface channel 1 (opti-
on)
X3B Encoder interface channel 2 (opti-
on)
X4A HSP5 interface
GB - 8
X4A
Control 1KF5xxx-xxxx in D & E housing
X2B
X2A
X6B
HSP5 diagnostic interface
X6C
depending on the operator
X6D
LED1 Inverter status
X4A