After Use - Dentsply Sirona X-Smart IQ Getting Started Manual

6
Motor Handpiece operation
Motor START/STOP
button.
iPad ® / motor
handpiece Bluetooth ®
connection LED status.
Battery charge LED
status.
Stand-alone
The stand-alone mode allows you to work without the iPad
Mode if needed. After the first connection, if you turn on the motor
handpiece without connecting it to the iPad
the stand-alone mode settings.
How to set the stand-alone mode
A
From the application
click on this icon.
B Select between
Continuous or
Reciprocating
stand-alone modes.
Help to identify a problem
and verify the status of the
motor handpiece.
Disconnect the motor handpiece.
Reciprocating motion mode
LED status.
Continuous rotation mode
LED status.
Multifunction button
The multifunction button provides the
following functions:
Connects the motor handpiece to the
application via Bluetooth .
®
Awakens the motor handpiece
(the motor handpiece does not turn off, it
automatically switches to stand-by mode).
Advance to the next file during a treatment.
Double press to move to the previous file.
®
® , it will run with
7

After use

Store and charge
A
the motor
handpiece
B
Green On:
Green blinking: Device charging.
Red On:
Red Blinking:
Remove the iPad
mini™ from the
protective case
Full recharge: 6 hours
Autonomy: 16 treatments
C
Charged.
Low battery.
Critical low battery.
3 7
X-Smart IQ™ Getting Started Guide