Bicycle Rack Function - Mercedes-Benz EQS 2021 Operator's Manual

Hide thumbs Also See for EQS 2021:
Table of Contents

Advertisement

Under the following conditions, a message may
appear on the driver's display even if the trailer
has been connected correctly:
LEDs have been installed in the trailer lighting
R
system.
The current has fallen below the trailer lighting
R
system's minimum current (50 mA).
%
Accessories can be connected to the perma-
nent power supply up to 180 W and to the
power supply that is switched on via the igni-
tion lock.
Uncoupling a trailer
& WARNING Risk of being crushed and
becoming trapped when uncoupling a
trailer
When uncoupling a trailer with an engaged
inertia-activated brake, your hand may
become trapped between the vehicle and the
trailer drawbar.
Do not uncouple trailers with an engaged
#
overrun brake.
* NOTE Damage during uncoupling with an
engaged overrun brake
The vehicle may be damaged if you uncouple
with an engaged overrun brake.
Do not uncouple trailers with an engaged
#
overrun brake.
& WARNING Risk of becoming trapped when
disconnecting the trailer cable
The vehicle may lower when the trailer cable is
disconnected.
This could result in you or other people
becoming trapped if parts of your or their
body are between the vehicle body and the
tyres or underneath the vehicle.
Make sure nobody is underneath the
#
vehicle or in the immediate vicinity of the
wheel arches when you disconnect the
trailer cable.
Secure the trailer against rolling away.
#
ohne
Driving and parking 405
Disconnect the electrical connection between
#
the vehicle and the trailer.
Uncouple the trailer.
#
Place the cover cap on the ball head.
#
%
Trailers with LED lighting: after uncoupling the
trailer, switch the vehicle on and then off
again.

Bicycle rack function

& WARNING Risk of an accident if the bicy-
cle rack is used incorrectly
The bicycle rack may become detached from
the vehicle in the following cases:
the permissible load capacity of the trailer
R
hitch is exceeded.
the bicycle rack is used incorrectly.
R
the bicycle rack is secured to the ball neck
R
beneath the ball head.

Advertisement

Table of Contents
loading

Table of Contents