Mercedes-Benz EQS 2021 Operator's Manual page 535

▌Overview of area avoidance on the route
You can define areas along a route that you would
like to avoid.
Motorways or multi-lane expressways that pass
through an area to be avoided may be included in
the route despite being blocked.
▌Avoiding a new area for the route
Multimedia system:
© EQ Z
4 5 5 5
Avoid areas
5
Select Avoid new area.
#
Starting using the map
Select Using map.
#
A red rectangle appears. This designates the
area that should be avoided.
Move the map ( page 531).
/
#
Set the map scale ( page 531).
/
#
Select a.
#
The area is entered into the list.
Starting using destination search
Select Via address entry.
#
Enter the address (
#
Select the destination in the list.
#
The map appears. The area is saved.
▌Changing an area to be avoided
Multimedia system:
©
4
Avoid areas
5
Select an area in the list.
#
Route
Select Edit.
#
To move an area on the map: swipe in any
#
direction on the central display.
Changing the size of the area
Move two fingers apart or together on the cen-
#
tral display.
Select a.
#
The area is entered into the list.
Taking the area for the route into account
Select the area in the list.
#
Activate
#
If route guidance is active, a new route is cal-
culated.
page 29).
/
EQ Z Route
5 5 5
Avoid area.
ohne
MBUX multimedia system 533
If there is no route yet, the setting is carried
over to the next route guidance.
The route can include an area that is to be
avoided in the following cases:
The destination is located in an area that is
R
to be avoided.
The route includes motorways or multi-
R
lane expressways which pass through an
area to be avoided.
There is no practical alternative route.
R
▌Deleting an area to be avoided
Multimedia system:
© EQ Z
4 5 5 5
Avoid areas
5
Deleting an area to be avoided
Select an area in the list.
#
Select Delete.
#
Confirm the prompt with Yes.
#
Deleting all areas to be avoided
If at least two areas to be avoided are set,
#
select Delete all.
Route