Mercedes-Benz EQS 2021 Operator's Manual page 296

294 Driving and parking
Combo 1 vehicle socket Combo 2 vehicle socket
Open socket flap 1 via the EQ module of the
#
multimedia system ( page 442).
/
or
Press the centre rear section of socket flap
#
1.
Socket flap 1 swings open and status display
2 lights up white.
ohne
Vehicles with an electric socket flap: if an obsta-
cle impedes the electric socket flap while it is
opening, the socket flap closes again automati-
cally and the driver's display shows a correspond-
ing display message.
%
When the vehicle is started (the õ display
is lit in the driver's display), socket flap
cannot be opened.
%
Only upper connection 3 is required for the
charging cable connector.
To charge at a mains socket, insert the mains
#
plug into the mains socket of the external
power source as far as it will go.
Insert the charging cable connector into vehi-
#
cle socket connection 3 to the stop. If the
wallbox/charging station is not equipped with
a charging cable, insert the plug of the vehi-
cle's charging cable into the wallbox/charging
station socket to the stop.
Make sure that the charging cable is not taut
when inserted.
Status display 2 flashes orange and, as soon
as the high-voltage battery is charged, blue.
1