Mercedes-Benz EQS 2021 Operator's Manual page 34

32 Electronic information products
Secure the roof luggage rack to the fastening
#
points beneath covers 1.
Comply with the installation instructions of the
#
roof luggage rack manufacturer.
Secure the load on the roof luggage rack.
#
Folding the rear seat backrests forward
& WARNING Risk of becoming trapped when
adjusting the seats
When you adjust a seat, you may trap yourself
or a vehicle occupant.
When adjusting a seat, make sure that
#
no one has any body parts in the sweep
of the seat.
& WARNING Risk of an accident because
the seat backrest is not engaged
The seat backrest may fold forwards.
There is a risk of the following, in particular:
The vehicle occupant may be pressed
R
against the seat belt. The seat belt cannot
protect as intended and could cause addi-
tional injury.
A child restraint system is no longer prop-
R
erly supported or properly positioned and
may no longer fulfil its function as inten-
ded.
The seat backrest cannot restrain objects
R
or goods in the boot or load compartment.
Always ensure that the seat backrest is
engaged, especially:
After the seat has been adjusted.
R
After the load compartment enlargement
R
has been folded forwards
Make sure that the red marking of the lock verifi-
cation indicator is no longer visible. Otherwise,
the seat backrest will not be locked.
Always ensure that all vehicle occupants have
their seat belts fastened correctly and are sitting
ohne
properly. Particular attention must be paid to chil-
dren.
Requirements:
The rear seat backrest head restraints are fully
R
inserted.
Vehicles with a folding rear armrest: the rear
R
armrest has been folded up.
Folding the rear seat backrests forward mechani-
cally
You can fold the centre and right seat backrests
forwards separately.
The left seat backrest can be folded forwards only
together with the centre seat backrest.
Vehicles with a "Premium rear passenger com-
partment" do not have a centre seat backrest.
If you no longer require the folded-down rear seat
backrest as a load area, fold the backrest back
into place.
Ensure that the centre seat backrest is in an
#
upright position and engaged with the left seat
backrest ( page 201).
/