Mercedes-Benz EQS 2021 Operator's Manual page 303

* NOTE Damage due to overheating of
charging cable and charging cable con-
nector
During the charging process, the charging
cable and charging cable connector can heat
up within their permissible limit values.
The permissible limit values are influenced by
the following factors:
the power supply system and the charging
R
cable are not damaged
the instructions for handling the charging
R
cable and the control element on the
charging cable have been observed
If the charging cable or charging cable
#
connector becomes too hot, have the
power supply system checked.
* NOTE Damaged or dirty vehicle socket
when the socket flap is open
Always keep the socket cover and the
#
socket flap closed when there is no
charging cable connected. This protects
the vehicle socket from dirt and damage.
Make sure that the socket cover is
#
closed properly before closing the socket
flap. This can otherwise result in damage
which may prevent the socket flap from
being opened again.
Requirements:
The distance between the key and the vehicle
R
does not exceed 1 m.
%
Depending on the national version, the vehicle
is equipped with one of the following vehicle
sockets.
ohne
Driving and parking 301
Combo 1 vehicle socket
Press charging interruption button 2.
#
The charging process is ended. Status display
1 lights up white. The vehicle socket is
unlocked.
Press and hold button 3 on the charging
#
cable connector and remove the charging
cable connector from the vehicle socket.