Mercedes-Benz EQS 2021 Operator's Manual page 371

Choose a vehicle level which is suited to
#
the driving style and the road surface
conditions.
& WARNING Risk of entrapment from vehi-
cle lowering
When lowering the vehicle, other people could
become trapped if their limbs are between the
vehicle body and the tyres or underneath the
vehicle.
Make sure no one is underneath the
#
vehicle or in the immediate vicinity of the
wheel arches when the vehicle is being
lowered.
& WARNING Risk of becoming trapped due
to the vehicle lowering
Vehicles with AMG RIDE CONTROL+ or level
control system: when you unload luggage or
leave the vehicle, the vehicle first rises slightly
and then returns to the set level shortly after-
wards.
You or anyone else in the vicinity of the wheel
arches or the underbody could thus become
trapped.
The vehicle can also be lowered after being
locked.
When leaving the vehicle, make sure that
#
nobody is in the vicinity of the wheel
arches or the underbody.
Multimedia system:
© ß y
4 5 5
Raising the vehicle
Requirements for raising the vehicle:
The vehicle has been started.
R
The vehicle is not moving faster than
R
40 km/h.
When the trailer socket is contacted (trailer/
R
bicycle rack): the vehicle is not moving faster
than 30 km/h.
Select t.
#
The indicator lamp lights up continuously.
The vehicle is raised to high level +1.
ohne
Driving and parking 369
Your selection is saved. High level +1 set remains
stored even after the vehicle has been switched
off.
The vehicle is lowered again in the following situa-
tions:
When driving faster than 50 km/h.
R
When the trailer socket is contacted (trailer/
R
bicycle rack): the vehicle is moving faster than
30 km/h.
GPS-based raising
If the function is activated, it is possible to save
the vehicle position when the vehicle level is
raised.
Confirm the prompt.
#
The position of the vehicle is stored. When the
previously stored position is reached again, a
prompt appears in the Zero Layer as to
whether the vehicle level should be raised
again.
%
Settings for GPS-based raising (
%
Zero Layer function ( page 440)
/
page 367)
/