Mercedes-Benz EQS 2021 Operator's Manual page 472

470 MBUX multimedia system
The cameras are switched on:
R
The front camera activates the front doors.
The rear camera activates the rear doors.
%
Observe the information on the system limits
of Active Blind Spot Assist with exit warning
( page 359).
/
The function can warn vehicle occupants about a
possible collision with an approaching vehicle or
bicycle when they exit the vehicle.
As soon as a vehicle occupant moves their hand
towards the door handle, depending on the vehi-
cle equipment, the following warnings are issued:
The active ambient lighting or ambient lighting
R
flashes red.
The warning lamp in the outside mirror also
R
flashes red for one of the front doors.
When the door is opened, a warning tone
R
sounds.
%
The visual warning is thus already given
before the door is opened.
%
Further information on Active Blind Spot
Assist with exit warning (
/
ambient lighting ( page 234).
/
Notes on fastening the child seat (SAFETY/intelli-
gent)
Requirements:
The front camera is switched on.
R
The MBUX Interior Assistant detects child
restraint systems on the front passenger seat. If a
child restraint system is not fastened, e.g. a rear-
ward-facing child seat, a message appears on the
central display.
The function assists you in making sure that a
child restraint system is secured with the seat belt
on the front passenger seat.
% For further information on securing a child
restraint system with the seat belt on the
front passenger seat ( page 132).
/
%
The MBUX Interior Assistant cannot check
whether the child is correctly restrained in the
child restraint system.
ohne
Presetting the seat position for the driver (COM-
page 359) and on FORT/intelligent)
Requirements:
The front camera is switched on.
R
When creating a user profile, the MBUX Interior
Assistant recognizes the size of the driver. This
allows the assistant to adjust the seat presets as
well as the position of the head restraint and
steering wheel if desired.
The driver can make additional fine adjustments
which are saved in the profile. When the profile is
reactivated, the last setting for the seat position is
called up automatically.
%
Further information for adjusting the driver's
seat:
Adjusting the front seat electrically
R
(
/
Setting the automatic seat adjustment on
R
the MBUX multimedia system
(
/
page 167)
page 180)