Lanner IIOT-I330 User Manual page 63

IIOT-I330 User Manual
Feature
Legacy USB Support
XHCI Hand-off
USB Mass Storage
Driver Support
USB transfer
time-out
Device reset
time-out
Device
power-up delay
Options
Enables Legacy USB support.
Enabled Auto option disables legacy support if no USB devices are
Disabled connected;
Auto Disabled option will keep USB devices available only for EFI
applications.
Enabled This is a workaround for OSes without XHCI hand-off support.
Disabled The XHCI ownership change should be claimed by XHCI driver.
Enabled
Enables or disables USB Mass Storage Driver Support.
Disabled
1 sec
5 sec
The time-out value for Control, Bulk, and Interrupt transfers
10 sec
20 sec
1 sec
5 sec
USB mass storage device Start Unit command time-out
10 sec
20 sec
Maximum time the device will take before it properly reports
Auto itself to the Host Controller. Auto uses default value: for a Root
Manual port, it is 100 ms, for a Hub port the delay is taken from Hub
descriptor.
63
Description