IIOT-I330 User Manual
The system supports one 2.5" HDD/SSD slot (SSD preferred) drive bay. The following will discuss disk drive
installation procedures.
1. The SSD kit includes:
1x 2.5" SSD
1x SATA Cables
1x SSD Bracket
1x Bracket Holder
2. Power off the system and open the
bottom chassis cover. Locate where the
SSD bracket will be placed on the bottom
chassis cover.
3. Place the 2.5" SSD on the bracket and
secure with two (2) screws on each side.
4. Insert the SATA cables to the SATA contact
on the disk.
SSD Bracket
Bracket
Holder
36
2.5" SSD
SATA Cables
SATA Contacts