Lanner IIOT-I330 User Manual page 30

IIOT-I330 User Manual
The system supports one M.2 B-Key for LTE module card expansion. LTE module requires two antennas
and one antenna for GPS (depending upon LTE module). Please follow the procedures for installation.
1. Locate the M.2 slot on the motherboard.
2. Align the notch of the module card with
the socket key in the pin slot.
3. Insert the module card at 30 degrees into
the socket until it is fully seated.
4. Push down on the module card and
secure it with a screw.
5. Next, thermal pad placement. Remove the
protective film on the thermal pad (included
in accessory pack) and gently place on the
larger square piece on the bottom chassis
cover (which once covered, will be placed
over LTE module card).
Notch
30