Table of Contents
Advertisement
IIOT-I330 User Manual
The motherboard provides one M.2 E-Key slot for a Wi-Fi module card. Wi-Fi module requires two
antennas. Please follow the procedures for installation.
1. Locate the M.2 slot on the motherboard.
2. Align the notch of the module card with
the socket key in the pin slot.
3. Insert the module card at 30 degrees into
the socket until it is fully seated.
4. Push down on the module card and
secure it with a screw.
5. Next, thermal pad placement. Remove
the protective film on the thermal pad
(included in accessory pack) and gently
place on the smaller square piece on the
bottom chassis cover (which once covered,
will be placed over Wi-Fi module card).
Notch
28
Advertisement
Table of Contents
