Table of Contents
Advertisement
IIOT-I330 User Manual
9. Push down on the module card and
secure it with two (2) screws.
10. Next, thermal pad placement.
Remove the protective film on the
thermal pad (included in the
accessory pack) and gently place on
the module card.
11. Then place the metal cover over the
thermal pad, and secure with two (2)
screws on the right side.
12. Gently place the top motherboard section and front panel chassis back together, secure with the
original seven (7) screws. Then place the bottom chassis cover back on and secure with the required
screws.
35
Advertisement
Table of Contents
