Technical Data; Fig. 8-8: General Technical Data; Fig. 8-9: Data Transfer; Fig. 8-10: Environmental Conditions - Bosch Rextroth Indramat RECO R-IB IL CNT Applications Manual

8-4
Programming, Technical Data and Ordering Information
8.3

Technical Data

General data
Housing dimensions
Weight
Operating mode
Basic functions
Connection method of 24 V sensors
Connection method of 5 V sensors
Connection method of the actuator
Connection method of all lines
Line cross section (typical)
Data transfer
Protocol
Chip
Transfer
Level
Environmental conditions
Regulations
Permissible temperature range
Air humidity
Atmospheric pressure
Degree of protection
Safety classification
All data that applies to the terminals of the RECO Inline product family is
listed in the "Planning and Installation of the Inline Product Family"
manuals. Only the data that is explicitly valid for the terminals or that
deviates from the generally valid data is contained here.
24.4 x 120 x 71.5 mm (B x H x T)
94 g (without connector)
Process data operation with 2 words
Frequency measurement,
pulse counting,
time measurement,
pulse generator
Two- and three-wire connection
2-wire connection with shield and external 5 V supply voltage
Two-wire connection
Tension spring terminals
2 2
0.2 mm to 1.5 mm

Fig. 8-8: General technical data

EN 50254
Optical Protocol Chip (OPC)
Data jumper
Logic level

Fig. 8-9: Data transfer

Developed according to VDE 0160, UL 508
Operation
Storage/transport
Operation
Storage/transport
Operation
Storage/transport
IP20 according to IEC 60529
Classification 3, according to VDE 0106, IEC 60536, DIN 57106-1

Fig. 8-10: Environmental conditions

-25 °C to +55 °C
-25 °C to +85 °C
75 % on average, 85 % occasionally, no moisture
condensation
75 % on average, 85 % occasionally, no moisture
condensation
80 kPa to 106 kPa (up to 2000 m above MSL)
70 kPa to 106 kPa (up to 3000 m above MSL)
DOK-CONTRL-R-IL*CNT***-AW02-EN-P
Counter Terminal