Aastra Ascotel IntelliGate A150 System Manual page 93

System configuration
Tab. 21 Configuration in AIMS
Parameter
Route
External GSM call number
CLIP authentication
CLIP selection
Enhanced functionality
Allow CLIP authentication
even if CLIP is unchecked
Allow enhanced GSM func-
tionality for directly incom-
ing calls
MWI route
MWI CLIP
Note:
In the case of an external call to an integrated GSM user the caller's CLIP is
always transmitted as redirecting information to the GSM terminal. This
also applies to external calls to a user who has redirected to an integrated
GSM user. In this case the parameter
set on Yes
activated by the network provider.
Tip:
The GSM integration described above is not limited to GSM terminals; it
can be used in principle for any external users.
See also:
A separate User's Guide is available for GSM terminals on Ascotel® Intelli-
Gate®. It includes an overview of the functions that can be carried out
using GSM terminals.
Terminals
Parameter value Remarks
<Route number> • This route is used if the GSM user's internal call number is
dialled and an external call is then made to the stored call
number.
<Call number> • The terminal's external call number in the GSM network is
entered here.
<Yes / No> • If this parameter value is set on Yes, the call number and pass-
word do not have to be entered to authenticate the GSM user.
<Normal / CLIP • This parameter influences the CLIP display to the GSM user
from User> dialled via his internal call number.
<Yes / No> • The enhanced functionality requires DSP resources (GSM
voice channels).
<Yes / No> • Trunk group setting: Allows the automatic authentication of
the GSM user via analogue or SIP network interfaces.
<Yes / No> • Trunk group setting: Allows the use of features of integration
level 2 if GSM integration is made with separate lines to the
GSM provider (depends on the provider).
<Route number> • Route for MWI signalling (new Voice Mail voice message) to
the integrated GSM user.
<CLIP No.> • The CLIP for MWI signalling (new Voice Mail voice message) to
the integrated GSM user is entered here. (input format the
same as an external call number e. g. 00326553827). The CLIP
is transmitted in accordance with the
parameter for trunk group settings.
in the trunk group settings and "Special Arrangement" must be
Interfaces and Terminals as of I7.8
Send redirecting information
Transit CLIP format
must be
93